dmesg - timed compression
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-42-generic (buildd@lgw01-55) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #49~14.04.1-Ubuntu SMP Wed Jun 29 20:22:11 UTC 2016 (Ubuntu 4.2.0-42.49~14.04.1-generic 4.2.8-ckt12)
Command line: BOOT_IMAGE=/vmlinuz-4.2.0-42-generic root=/dev/mapper/compute5--vg-root ro nomdmonddf nomdmonisw
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000963ff] usable
BIOS-e820: [mem 0x0000000000096400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4f20-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffadfff] ACPI data
BIOS-e820: [mem 0x00000000bffae000-0x00000000bffdffff] ACPI NVS
BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x0000000c3fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: SUPERMICRO X7QC3/X7QC3, BIOS 080015 08/08/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0xc40000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask F800000000 write-back
1 base 0800000000 mask FC00000000 write-back
2 base 0C00000000 mask FFC0000000 write-back
3 base 00C0000000 mask FFC0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 32GB, type WB
reg 1, base: 32GB, range: 16GB, type WB
reg 2, base: 48GB, range: 1GB, type WB
reg 3, base: 3GB, range: 1GB, type UC
total RAM covered: 49152M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 4GB, range: 4GB, type WB
reg 3, base: 8GB, range: 8GB, type WB
reg 4, base: 16GB, range: 16GB, type WB
reg 5, base: 32GB, range: 16GB, type WB
reg 6, base: 48GB, range: 1GB, type WB
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000090000] 90000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01ff6000, 0x01ff6fff] PGTABLE
BRK [0x01ff7000, 0x01ff7fff] PGTABLE
BRK [0x01ff8000, 0x01ff8fff] PGTABLE
init_memory_mapping: [mem 0xc3fe00000-0xc3fffffff]
[mem 0xc3fe00000-0xc3fffffff] page 2M
BRK [0x01ff9000, 0x01ff9fff] PGTABLE
init_memory_mapping: [mem 0xc20000000-0xc3fdfffff]
[mem 0xc20000000-0xc3fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbff9ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbff9ffff] page 4k
init_memory_mapping: [mem 0x100000000-0xc1fffffff]
[mem 0x100000000-0xc1fffffff] page 2M
BRK [0x01ffa000, 0x01ffafff] PGTABLE
BRK [0x01ffb000, 0x01ffbfff] PGTABLE
RAMDISK: [mem 0x355ca000-0x36adcfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB1F0 000014 (v00 ACPIAM)
ACPI: RSDT 0x00000000BFFA0000 000038 (v01 080808 RSDT1448 20080808 MSFT 00000097)
ACPI: FACP 0x00000000BFFA0200 000084 (v01 080808 FACP1448 20080808 MSFT 00000097)
ACPI: DSDT 0x00000000BFFA0530 004C8A (v01 1ADQT 1ADQT004 00000004 INTL 20051117)
ACPI: FACS 0x00000000BFFAE000 000040
ACPI: APIC 0x00000000BFFA0390 00015E (v01 080808 APIC1448 20080808 MSFT 00000097)
ACPI: MCFG 0x00000000BFFA04F0 00003C (v01 080808 OEMMCFG 20080808 MSFT 00000097)
ACPI: OEMB 0x00000000BFFAE040 000071 (v01 080808 OEMB1448 20080808 MSFT 00000097)
ACPI: HPET 0x00000000BFFA51C0 000038 (v01 080808 OEMHPET 20080808 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x0000000c3fffffff]
NODE_DATA(0) allocated [mem 0xc3ffce000-0xc3ffd2fff]
[ffffea0000000000-ffffea0030ffffff] PMD -> [ffff880c0f600000-ffff880c3f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x0000000c3fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000095fff]
node 0: [mem 0x0000000000100000-0x00000000bff9ffff]
node 0: [mem 0x0000000100000000-0x0000000c3fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x0000000c3fffffff]
On node 0 totalpages: 12582709
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3989 pages, LIFO batch:0
DMA32 zone: 12223 pages used for memmap
DMA32 zone: 782240 pages, LIFO batch:31
Normal zone: 184320 pages used for memmap
Normal zone: 11796480 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 28, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 29, version 32, address 0xfec81000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 16 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00096000-0x00096fff]
PM: Registered nosave memory: [mem 0x00097000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e4fff]
PM: Registered nosave memory: [mem 0x000e5000-0x000fffff]
PM: Registered nosave memory: [mem 0xbffa0000-0xbffadfff]
PM: Registered nosave memory: [mem 0xbffae000-0xbffdffff]
PM: Registered nosave memory: [mem 0xbffe0000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:32 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff880c0ee00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
Built 1 zonelists in Node order, mobility grouping on. Total pages: 12386081
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-42-generic root=/dev/mapper/compute5--vg-root ro nomdmonddf nomdmonisw
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 49435636K/50330836K available (7969K kernel code, 1248K rwdata, 3820K rodata, 1472K init, 1292K bss, 895200K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=32.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=32
NR_IRQS:16640 nr_irqs:1088 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-31.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2926.058 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5852.11 BogoMIPS (lpj=11704232)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff81eaa000 - ffffffff81eb1000)
ftrace: allocating 31010 entries in 122 pages
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU X7350 @ 2.93GHz (fam: 06, model: 0f, stepping: 0b)
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
x86: Booted up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (93632.59 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xbffae000-0xbffdffff] (204800 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 8:42:37, date: 05/29/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
\_SB_:_OSC evaluation returned wrong type
_OSC request data:1 1f
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150619/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
pci 0000:00:00.0: [8086:3600] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3604] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:3605] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:3607] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [8086:3609] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:08.0: [8086:360b] type 00 class 0x088000
pci 0000:00:08.0: reg 0x10: [mem 0xfdfff800-0xfdfffbff 64bit]
pci 0000:00:08.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:360c] type 00 class 0x060000
pci 0000:00:10.1: [8086:360c] type 00 class 0x060000
pci 0000:00:10.2: [8086:360c] type 00 class 0x060000
pci 0000:00:10.3: [8086:360c] type 00 class 0x060000
pci 0000:00:11.0: [8086:360d] type 00 class 0x060000
pci 0000:00:11.3: [8086:360d] type 00 class 0x060000
pci 0000:00:13.0: [8086:360e] type 00 class 0x060000
pci 0000:00:15.0: [8086:360f] type 00 class 0x060000
pci 0000:00:16.0: [8086:3610] type 00 class 0x060000
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xe080-0xe09f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xe000-0xe01f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xdc00-0xdc1f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.2: [8086:2680] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xec00-0xec07]
pci 0000:00:1f.2: reg 0x14: [io 0xe880-0xe883]
pci 0000:00:1f.2: reg 0x18: [io 0xe800-0xe807]
pci 0000:00:1f.2: reg 0x1c: [io 0xe480-0xe483]
pci 0000:00:1f.2: reg 0x20: [io 0xe400-0xe40f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfdfffc00-0xfdffffff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:269b] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
pci 0000:08:00.0: [8086:10a7] type 00 class 0x020000
pci 0000:08:00.0: reg 0x10: [mem 0xfdee0000-0xfdefffff]
pci 0000:08:00.0: reg 0x14: [mem 0xfdec0000-0xfdedffff]
pci 0000:08:00.0: reg 0x18: [io 0xcc00-0xcc1f]
pci 0000:08:00.0: reg 0x1c: [mem 0xfdebc000-0xfdebffff]
pci 0000:08:00.0: reg 0x30: [mem 0xfde80000-0xfde9ffff pref]
pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
pci 0000:08:00.0: System wakeup disabled by ACPI
pci 0000:08:00.1: [8086:10a7] type 00 class 0x020000
pci 0000:08:00.1: reg 0x10: [mem 0xfde60000-0xfde7ffff]
pci 0000:08:00.1: reg 0x14: [mem 0xfde40000-0xfde5ffff]
pci 0000:08:00.1: reg 0x18: [io 0xc880-0xc89f]
pci 0000:08:00.1: reg 0x1c: [mem 0xfdeb8000-0xfdebbfff]
pci 0000:08:00.1: reg 0x30: [mem 0xfde20000-0xfde3ffff pref]
pci 0000:08:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 08]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff]
pci 0000:04:00.0: [8086:3500] type 01 class 0x060400
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:04:00.3: [8086:350c] type 01 class 0x060400
pci 0000:04:00.3: PME# supported from D0 D3hot D3cold
pci 0000:04:00.3: System wakeup disabled by ACPI
pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 04-07]
pci 0000:00:02.0: bridge window [io 0x9000-0xbfff]
pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfdcfffff]
pci 0000:06:00.0: [8086:3510] type 01 class 0x060400
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:04:00.0: PCI bridge to [bus 06-07]
pci 0000:04:00.0: bridge window [io 0x9000-0xbfff]
pci 0000:04:00.0: bridge window [mem 0xfd800000-0xfdcfffff]
pci 0000:07:00.0: [1000:0059] type 00 class 0x010000
pci 0000:07:00.0: reg 0x10: [io 0xb000-0xb0ff]
pci 0000:07:00.0: reg 0x14: [mem 0xfdcfc000-0xfdcfffff 64bit]
pci 0000:07:00.0: reg 0x1c: [mem 0xfdce0000-0xfdceffff 64bit]
pci 0000:07:00.0: reg 0x30: [mem 0xfda00000-0xfdbfffff pref]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0x9000-0xbfff]
pci 0000:06:00.0: bridge window [mem 0xfd800000-0xfdcfffff]
pci 0000:04:00.3: PCI bridge to [bus 05]
pci 0000:00:04.0: PCI bridge to [bus 03]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:01:01.0: [1002:515e] type 00 class 0x030000
pci 0000:01:01.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
pci 0000:01:01.0: reg 0x14: [io 0x8000-0x80ff]
pci 0000:01:01.0: reg 0x18: [mem 0xfd7f0000-0xfd7fffff]
pci 0000:01:01.0: reg 0x30: [mem 0xfd7c0000-0xfd7dffff pref]
pci 0000:01:01.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x6000-0x8fff]
pci 0000:00:1e.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xdfefffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
vgaarb: setting as boot device: PCI:0000:01:01.0
vgaarb: device added: PCI:0000:01:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:01.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00096400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
system 00:05: [io 0x0a00-0x0a0f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: [io 0x0480-0x04bf] has been reserved
system 00:06: [mem 0xfed04000-0xfed1bfff] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed9ffff] has been reserved
system 00:06: [mem 0xfec01000-0xfec7ffff] has been reserved
system 00:06: [mem 0xfec80000-0xfec85fff] could not be reserved
system 00:06: [mem 0xfec86000-0xfec8ffff] has been reserved
system 00:06: [mem 0xff000000-0xff3fffff] has been reserved
system 00:06: [mem 0xff400000-0xff7fffff] has been reserved
system 00:06: [mem 0xff800000-0xffbfffff] could not be reserved
system 00:06: [mem 0xffc00000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:09: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0x00100000-0xbfffffff] could not be reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 10 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 08]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfdd00000-0xfdefffff]
pci 0000:06:00.0: PCI bridge to [bus 07]
pci 0000:06:00.0: bridge window [io 0x9000-0xbfff]
pci 0000:06:00.0: bridge window [mem 0xfd800000-0xfdcfffff]
pci 0000:04:00.0: PCI bridge to [bus 06-07]
pci 0000:04:00.0: bridge window [io 0x9000-0xbfff]
pci 0000:04:00.0: bridge window [mem 0xfd800000-0xfdcfffff]
pci 0000:04:00.3: PCI bridge to [bus 05]
pci 0000:00:02.0: PCI bridge to [bus 04-07]
pci 0000:00:02.0: bridge window [io 0x9000-0xbfff]
pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfdcfffff]
pci 0000:00:04.0: PCI bridge to [bus 03]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci 0000:00:1e.0: bridge window [io 0x6000-0x8fff]
pci 0000:00:1e.0: bridge window [mem 0xfd700000-0xfd7fffff]
pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xdfefffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff window]
pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:08: resource 1 [mem 0xfdd00000-0xfdefffff]
pci_bus 0000:04: resource 0 [io 0x9000-0xbfff]
pci_bus 0000:04: resource 1 [mem 0xfd800000-0xfdcfffff]
pci_bus 0000:06: resource 0 [io 0x9000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfdcfffff]
pci_bus 0000:07: resource 0 [io 0x9000-0xbfff]
pci_bus 0000:07: resource 1 [mem 0xfd800000-0xfdcfffff]
pci_bus 0000:01: resource 0 [io 0x6000-0x8fff]
pci_bus 0000:01: resource 1 [mem 0xfd700000-0xfd7fffff]
pci_bus 0000:01: resource 2 [mem 0xcff00000-0xdfefffff 64bit pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:01: resource 8 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:01: resource 9 [mem 0xf0000000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 32768 (order: 8, 1048576 bytes)
UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
pci 0000:08:00.0: Disabling L0s
pci 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
pci 0000:08:00.1: Disabling L0s
pci 0000:08:00.1: can't disable ASPM; OS doesn't have ASPM control
pci 0000:01:01.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 21580K (ffff8800355ca000 - ffff880036add000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbfa0000-0xbffa0000] (64MB) mapped at [ffff8800bbfa0000-ffff8800bff9ffff]
microcode: CPU0 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU1 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU2 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU3 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU4 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU5 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU6 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU7 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU8 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU9 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU10 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU11 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU12 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU13 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU14 sig=0x6fb, pf=0x8, revision=0xb6
microcode: CPU15 sig=0x6fb, pf=0x8, revision=0xb6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 8192 (order: 7, 524288 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1527583357.864:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90006c00000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
ata4: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e080
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-42-generic uhci_hcd
usb usb1: SerialNumber: 0000:00:1d.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-42-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000dc00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.2.0-42-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.2
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: e17861789c2d8f1b8fc36cca1b402a6df7b7eea8'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 2:704:726
block loop6: hash matches
rtc_cmos 00:01: setting system clock to 2018-05-29 08:42:38 UTC (1527583358)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata3.01: NODEV after polling detection
ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB00 PQ: 0 ANSI: 5
sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
tsc: Refined TSC clocksource calibration: 2926.006 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a2d39f7ea5, max_idle_ns: 440795214577 ns
clocksource: Switched to clocksource tsc
Freeing unused kernel memory: 1472K (ffffffff81d3a000 - ffffffff81eaa000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
Freeing unused kernel memory: 276K (ffff880001bbb000 - ffff880001c00000)
systemd-udevd[230]: starting version 204
md: linear personality registered for level -1
Floppy drive(s): fd0 is 1.44M
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
md: multipath personality registered for level -4
PTP clock support registered
FDC 0 is a post-1991 82077
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
dca service started, version 1.12.1
md: raid0 personality registered for level 0
Fusion MPT SAS Host driver 3.04.20
mptbase: ioc0: Initiating bringup
md: raid1 personality registered for level 1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.18-k
igb: Copyright (c) 2007-2014 Intel Corporation.
raid6: sse2x1 gen() 1660 MB/s
raid6: sse2x1 xor() 4966 MB/s
igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:5f:82:d8
igb 0000:08:00.0: eth0: PBA No: Unknown
igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:08:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:5f:82:d9
igb 0000:08:00.1: eth1: PBA No: Unknown
igb 0000:08:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
ioc0: Capabilities={Initiator}
raid6: sse2x2 gen() 5158 MB/s
raid6: sse2x2 xor() 6049 MB/s
raid6: sse2x4 gen() 7819 MB/s
raid6: sse2x4 xor() 5138 MB/s
raid6: using algorithm sse2x4 gen() 7819 MB/s
raid6: .... xor() 5138 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 11663.000 MB/sec
generic_sse: 10348.000 MB/sec
xor: using function: prefetch64-sse (11663.000 MB/sec)
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
scsi host4: ioc0: (null), FwRev=01160100h, Ports=1, MaxQ=366, IRQ=16
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x500000e0191836a2
scsi 4:0:0:0: Direct-Access FUJITSU MBA3147RC 0103 PQ: 0 ANSI: 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: [sda] 287277984 512-byte logical blocks: (147 GB/136 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: bf 00 00 08
sd 4:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < >
sd 4:0:0:0: [sda] Attached SCSI disk
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x500000e01914d2c2
scsi 4:0:1:0: Direct-Access FUJITSU MBA3147RC 0103 PQ: 0 ANSI: 5
sd 4:0:1:0: Attached scsi generic sg2 type 0
sd 4:0:1:0: [sdb] 287277984 512-byte logical blocks: (147 GB/136 GiB)
sd 4:0:1:0: [sdb] Write Protect is off
sd 4:0:1:0: [sdb] Mode Sense: bf 00 00 08
sd 4:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:1:0: [sdb] Attached SCSI disk
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 2, phy 2, sas_addr 0x500000e019d2c722
scsi 4:0:2:0: Direct-Access FUJITSU MBA3147RC 0103 PQ: 0 ANSI: 5
sd 4:0:2:0: Attached scsi generic sg3 type 0
sd 4:0:2:0: [sdc] 287277984 512-byte logical blocks: (147 GB/136 GiB)
sd 4:0:2:0: [sdc] Write Protect is off
sd 4:0:2:0: [sdc] Mode Sense: bf 00 00 08
sd 4:0:2:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:2:0: [sdc] Attached SCSI disk
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 3, phy 3, sas_addr 0x5000c50062844bd5
scsi 4:0:3:0: Direct-Access SEAGATE ST1000NM0023 0004 PQ: 0 ANSI: 6
sd 4:0:3:0: Attached scsi generic sg4 type 0
sd 4:0:3:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:3:0: [sdd] Write Protect is off
sd 4:0:3:0: [sdd] Mode Sense: db 00 10 08
sd 4:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 4:0:3:0: [sdd] Attached SCSI disk
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 4, phy 4, sas_addr 0x5000c50062870be9
scsi 4:0:4:0: Direct-Access SEAGATE ST1000NM0023 0004 PQ: 0 ANSI: 6
sd 4:0:4:0: Attached scsi generic sg5 type 0
sd 4:0:4:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 4:0:4:0: [sde] Write Protect is off
sd 4:0:4:0: [sde] Mode Sense: db 00 10 08
sd 4:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
sd 4:0:4:0: [sde] Attached SCSI disk
random: nonblocking pool is initialized
EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (737) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: ureadahead main process (740) terminated with status 5
Adding 50327548k swap on /dev/mapper/compute5--vg-swap_1. Priority:-1 extents:1 across:50327548k FS
EXT4-fs (dm-5): re-mounted. Opts: errors=remount-ro
EXT4-fs (dm-1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd-udevd[902]: starting version 204
lp: driver loaded but no devices found
device-mapper: multipath: version 1.9.0 loaded
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ioatdma: Intel(R) QuickData Technology Driver 4.00
intel_rng: FWH not detected
i7300_idle: loaded v1.55
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to module i7300_edac.c controller I7300: DEV 0000:00:10.0 (POLLED)
EDAC PCI0: Giving out device to module i7300_edac controller EDAC PCI controller: DEV 0000:00:10.0 (POLLED)
[drm] Initialized drm 1.1.0 20060810
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.2: Using relative temperature scale!
coretemp coretemp.4: Using relative temperature scale!
coretemp coretemp.6: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.2: Using relative temperature scale!
coretemp coretemp.4: Using relative temperature scale!
coretemp coretemp.6: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.2: Using relative temperature scale!
coretemp coretemp.4: Using relative temperature scale!
coretemp coretemp.6: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.2: Using relative temperature scale!
coretemp coretemp.4: Using relative temperature scale!
coretemp coretemp.6: Using relative temperature scale!
gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable
gpio_ich: GPIO from 462 to 511 on gpio_ich
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (d0000000 300000) vs hw (d0000000 8000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RV100 0x1002:0x515E 0x15D9:0xA380).
[drm] register mmio base: 0xFD7F0000
[drm] register mmio size: 65536
radeon 0000:01:01.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (32M used)
radeon 0000:01:01.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 16bits DDR
[TTM] Zone kernel: Available graphics memory: 24729602 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCI GART of 512M enabled (table at 0x00000000BBB00000).
radeon 0000:01:01.0: WB disabled
radeon 0000:01:01.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff8800bb10a000
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
[drm] Loading R100 Microcode
audit: type=1400 audit(1527583400.435:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1173 comm="apparmor_parser"
audit: type=1400 audit(1527583400.435:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1173 comm="apparmor_parser"
audit: type=1400 audit(1527583400.435:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1173 comm="apparmor_parser"
audit: type=1400 audit(1527583400.439:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1173 comm="apparmor_parser"
audit: type=1400 audit(1527583400.439:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1173 comm="apparmor_parser"
audit: type=1400 audit(1527583400.439:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1173 comm="apparmor_parser"
audit: type=1400 audit(1527583400.439:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1174 comm="apparmor_parser"
audit: type=1400 audit(1527583400.439:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1174 comm="apparmor_parser"
audit: type=1400 audit(1527583400.439:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1174 comm="apparmor_parser"
audit: type=1400 audit(1527583400.439:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1170 comm="apparmor_parser"
[drm] radeon: ring at 0x00000000B0001000
[drm] ring test succeeded in 1 usecs
[drm] ib test succeeded in 0 usecs
[drm] No TV DAC info found in BIOS
[drm] No valid Ext TMDS info found in BIOS
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] DVI-I-1
[drm] HPD2
[drm] DDC: 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c 0x6c
[drm] Encoders:
[drm] CRT2: INTERNAL_DAC2
[drm] DFP2: INTERNAL_DVO1
[drm] fb mappable at 0xD0040000
[drm] vram apper at 0xD0000000
[drm] size 1384448
[drm] fb depth is 8
[drm] pitch is 1536
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 180x56
radeon 0000:01:01.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:01.0: registered panic notifier
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[drm] Initialized radeon 2.43.0 20080528 for 0000:01:01.0 on minor 0
init: failsafe main process (1376) killed by TERM signal
irq 18: nobody cared (try booting with the "irqpoll" option)
CPU: 0 PID: 1506 Comm: dmraid Not tainted 4.2.0-42-generic #49~14.04.1-Ubuntu
Hardware name: SUPERMICRO X7QC3/X7QC3, BIOS 080015 08/08/2008
0000000000000000 ffff880c0ee03e08 ffffffff817bc281 ffff880c03256e00
ffff880c03256ebc ffff880c0ee03e38 ffffffff810d3406 ffffffff817c62fa
ffff880c03256e00 0000000000000012 0000000000000000 ffff880c0ee03e88
Call Trace:
[] dump_stack+0x63/0x81
[] __report_bad_irq+0x36/0xd0
[] ? do_IRQ+0x5a/0xe0
[] note_interrupt+0x222/0x280
[] ? add_interrupt_randomness+0x3a/0x1c0
[] handle_irq_event_percpu+0xb4/0x1d0
[] handle_irq_event+0x49/0x70
[] handle_fasteoi_irq+0x9a/0x150
[] handle_irq+0x25/0x40
[] do_IRQ+0x51/0xe0
[] common_interrupt+0x6b/0x6b
[] ? clear_page+0xc/0x10
[] ? clear_huge_page+0x89/0x160
[] do_huge_pmd_anonymous_page+0x24e/0x410
[] ? __mem_cgroup_count_vm_event+0x10/0x50
[] handle_mm_fault+0x19f/0x11e0
[] __do_page_fault+0x19a/0x430
[] do_page_fault+0x22/0x30
[] page_fault+0x28/0x30
handlers:
[] usb_hcd_irq
Disabling IRQ #18
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
nbd: registered device at major 43
igb 0000:08:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: wait-for-state (nova-computelibvirt-bin) main process (1954) killed by TERM signal
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
init: plymouth-upstart-bridge main process ended, respawning
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
device virbr0-nic entered promiscuous mode
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
perf interrupt took too long (2770 > 2500), lowering kernel.perf_event_max_sample_rate to 50000